Home | Buy Lampwork Beads | Leonardo Petal Pullers and Tools

The Leonardo Petal Puller (patent pending)  is a style of tool I designed about 3 years ago. I decided to market it for everyone to use and enjoy as much as I have. It "pulls" petals to make your flowers and leaves very easily. You can make a variety of flowers with this tool depending on how and where you put the petals. You can make orchids, pansies, daisies, roses among many others.

Make a basic flower:

1) Add frits, mix rod colors, add strips of latticino before you pull the petal.

2) Pull Petal and set the Petal on a small coffee warmer. Pull double the amount of petals you need.

3) Make a saggy tab bead and add the petals, keeping the weight of the tab bead on bottom.

4) add cane in between the petals to hide seams and give more interest.

Make a rose flower:

Make a small tube beads, add the petals to make roses. Be sure to pull a couple green leaves too.

You can also manipulate the petals with other tools such as the "ruffler" tool. The ruffler tool "crimps" the petal to give it a natural wavy look. You can heat the tip of the flower and pull or pinch the glass with tweezers to make it more of a point. Just let your imagination run wild!

3 Leonardo Geometric Imprint Tools Price: $84.97 Purchase the 3 Geometric TOOLS AND SAVE $5! The brass imprinters have a pattern head of 13mm and is 5 inches long. They can be used anywhere on a bead for texture and are small enough that you can place a few imprints on a bead or just make small beads for sets or can he used on head pins. The 3 tools included in the geometric patterns are the Leonardo Concentric Circles, Leonardo Concentric Hexagon and the Leonardo Diamond Hex. View Complete Details Click to Enlarge

Leonardo Diamond Hex Imprint Tool Price: $29.99 The Leonardo Diamond Hex brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and is small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins. View Complete Details Click to Enlarge

Leonardo Concentric Circles Imprint Tool Price: $29.99 The Leonardo Concentric Circles brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and is small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins. View Complete Details Click to Enlarge

Leonardo Concentric Hexagon Imprint Tool Price: $29.99 The Leonardo Concentric Hexagon brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and is small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown. View Complete Details Click to Enlarge

Leonardo Snowflake Imprint Tool Price: $29.99 The Leonardo Fancy Snowflake brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown. View Complete Details Click to Enlarge

Leonardo Gingerbread Man Imprint Tool Price: $29.99 The Gingerbread Man brass imprinter (stamp) has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead to texturize and is small enough that you can place a few imprints on a bead or just make small beads for sets. We are currently designing new patterns and will offer them when available. The imprint designs are custom made here in America and have been tested for durability, quality and excellence. Bead not included. View Complete Details Click to Enlarge

Leonardo Bell Imprint Tool Price: $29.99 The (Christmas) Bell brass imprinter (stamp) has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and is small enough that you can place a few imprints on a bead or just make small beads for sets. We are currently designing new patterns and will offer them when available. The imprint designs are custom made here in America and have been tested for durability, quality and excellence. Bead not included. View Complete Details Click to Enlarge

Leonardo Skull Imprint Tool Price: $29.99 The Leonardo Skull brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown. View Complete Details Click to Enlarge

Leonardo Oak Leaf Brass Imprint Stamp Price: $29.99 The Leonardo Oak leaf brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown View Complete Details Click to Enlarge

Leonardo Pumpkin Imprint Tool Price: $29.99 The Leonardo Pumpkin brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown View Complete Details Click to Enlarge

Leonardo Acorn Imprinter Price: $29.99 The Leonardo Acorn brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown. View Complete Details Click to Enlarge

Leonardo Deep Pawprint Imprint tool Price: $29.99 The Leonardo Deep Pawprint brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a raised or puffy design that allows the glass imprint to look pressed down into the glass when used. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown. View Complete Details Click to Enlarge

Leonardo Puffy Pawprint Imprint Tool Price: $29.99 The Leonardo Puffy Pawprint brass imprinter (brass stamp) has a pattern head of 13mm and is 5 inches long. This tool has a concave design that allows the glass imprint to look raised or puffy when used. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown. View Complete Details Click to Enlarge

Leonardo Peace Sign Imprint Tool Price: $29.99 The Leonardo Peace Sign brass imprinter (Leonardo brass stamp) has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets or even head pins as shown. There are a few designs that would make for an interesting 60's look. Can be used with PMC, Clay or Metal. View Complete Details Click to Enlarge

Choose your 5 Imprint Tool Designs Price: $139.99 CHOOSE YOUR 5 TOOLS AND SAVE $10! The brass imprinters have a pattern head of 13mm and is 5 inches long. They can be used anywhere on a bead fro texture and are small enough that you can place a few imprints on a bead or just make small beads for sets. You chose which 5 tools you want. You can choose from these 10 designs: View Complete Details Click to Enlarge

Choose Any 3 Leonardo Imprint Tool Designs Price: $84.97 CHOOSE YOUR 5 TOOLS AND SAVE $5! The brass imprinters have a pattern head of 13mm and is 5 inches long. They can be used anywhere on a bead for texture and are small enough that you can place a few imprints on a bead or just make small beads for sets. You chose which 3 tools you want. You can choose from all designs. View Complete Details Click to Enlarge

Leonardo Medium Leonardo Petal Puller Price: $24.99 The small puller allows you to pull petals approximately 4mm by 17mm by 25mm. The handle is 8 inches long. Click to find out more!!! Basic Instructions will be sent with purchase of puller. View Complete Details Click to Enlarge

All 6 Leonardo Feather & Fishbone Tools Price: $170.00 SAVE $10 buy all 6 tools. The fine, medium, and large in both styles. The Leonardo Fishbone Tools and the Leonardo Featherbone Tools. The sizes are .03, .05, .07mm. The tweezers length is 7 or 8 inches depending on availabilty when ordering. The head size is 1 inch to 1 1/2 inches. View Complete Details Click to Enlarge

3 Leonardo Fishbone Tools, fine. medium, large Price: $85.00 SAVE $5.00 order all 3 sizes of the Leonardo Fishbone Tools, fine, medium and large has a has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are .07mm. View Complete Details Click to Enlarge

3 Leonardo Featherbone Tools, fine, medium and large Price: $85.00 SAVE $5.00, order all 3 sizes of the Leonardo Featherbone Tools. They have a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are fine .03mm, medium .05mm and large 07mm. View Complete Details Click to Enlarge

Leonardo Fish Fin Tool Price: $29.99 The Leonardo Fish Fin Medium Tool has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1/2 by 1 1/2 inches. The prongs are .05mm. FREE beeswax shipped with order. View Complete Details Click to Enlarge

Leonardo Fishbone Tool Fine Price: $29.99 The Leonardo Fishbone Fine Tool has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are .03mm. FREE beeswax shipped with order. View Complete Details Click to Enlarge

Leonardo Fishbone Tool Medium Price: $29.99 The Leonardo Fishbone Medium Tool has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are .05mm. FREE beeswax with every order! View Complete Details Click to Enlarge

Leonardo Fishbone Tool Large Price: $29.99 The Leonardo Fishbone Large Tool has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are .07mm. View Complete Details Click to Enlarge

Leonardo Featherbone Tool Fine Price: $29.99 The Leonardo Featherbone Fine Tool has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are .03mm. View Complete Details Click to Enlarge

Leonardo Featherbone Tool Medium Price: $29.99 The Leonardo Featherbone Medium Tool has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are .05mm. Free beeswax with every order! View Complete Details Click to Enlarge

Leonardo Featherbone Tool Large Price: $29.99 The Leonardo Featherbone Large Tool has a tweezer length of 7 or 8 inches depending on which length is available at the time of ordering. The head of the tool measures 1 by 1 1/2 inches. The prongs are .07mm. Free beeswax with every order! View Complete Details Click to Enlarge

ART BEAD JEWELRY "Seasons in Glass" Book Price: $21.99 Lampwork glass beads bring joy to the wearer and pride to the collector. Beads are everywhere and used in many different ways. Each lampwork bead is unique and adds a special touch to your jewelry designs…your jewelry designs become one of a kind! The book will show you...... View Complete Details Click to Enlarge

Leonardo Brass Imprint Tool 2nd Set Price: $139.99 SAVE $10 BUY all 5! The brass imprinters have a pattern head of 13mm and is 5 inches long. They can be used anywhere on a bead and are small enough that you can place a few imprints on a bead, texturize with them or just make small beads for sets. You will receive 1 heart ,1 puffy heart , 1 smiley face , 1 daisy and 1 grid . View Complete Details Click to Enlarge

Leonardo Brass Imprinters Starter Set Price: $139.99 SAVE $10 BUY all 5! The brass imprinters have a pattern head of 13mm and is 5 inches long. They can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets. You will receive 1 pinwheel, 1 cross, 1 spiral, 1 flower and 1 star. These are considered the Starter Set. View Complete Details Click to Enlarge

Leonardo Heart Imprint Tool Price: $29.99 The Heart brass imprinter (outlined heart) has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can use it to texturize a bead or place a few imprints in various places or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Puffy Heart Imprint Tool Price: $29.99 The puffy heart brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can use it to texturize a bead or place a few imprints in various places or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Smiley Face Imprint Tool Price: $29.99 The Smiley Face brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead to texturize and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Daisy Imprint Tool Price: $29.99 The Daisy brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead to texturize and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Grid Imprint Tool Price: $29.99 The Grid brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead to texturize and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Pinwheel Brass Imprinter Price: $29.99 The pinwheel brass imprinter has a pattern head of 13mm and is 5 inches long.It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Flower Brass Imprinter Price: $29.99 The flower brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Cross Brass Imprinter Price: $29.99 The flower brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Spiral Brass Imprinter Price: $29.99 The cross brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

Leonardo Star Brass Imprinter Price: $29.99 The cross brass imprinter has a pattern head of 13mm and is 5 inches long. It can be used anywhere on a bead and are small enough that you can place a few imprints on a bead or just make small beads for sets. View Complete Details Click to Enlarge

The Leonardo Petal Puller Flower DVD Price: $24.99 Learn how to make my 6 petal flowers using the petal puller and "ruffler" tool from start to finish. I will show you how to place your petals on a tab bead and make the striated inner petal cane that finishes the flower. The DVD is approximately 30 minutes long. The flower can be made in both soft and hard glass. View Complete Details Click to Enlarge

Small Leonardo Petal Puller Price: $24.99 The small puller allows you to pull petals approximately 4mm by 12mm by 19mm. The handle is 8 inches long. Click to find out more!!! Basic Instructions will be sent with purchase of puller. View Complete Details Click to Enlarge

Large Leonardo Petal Puller Price: $24.99 The large petal puller allows you to pull petals approximately 4mm by 20mm by 30mm. The handle is 8 inches long without the petal tip. Basic Instructions will be sent with purchase of puller! View Complete Details Click to Enlarge

Leonardo Large Petal Presser Price: $24.99 The NEW petal presser is actually my large petal puller with the petals inverted. This version of the tool allows you to make a petal shape without having to pull the petal from the glass. All you do is add your glass to the bead and press with the tool. It will give you a broader petal shape with a round edge. Heat the tip of the flower petal and pull the tip out with your tweezers if you want a pointed end. View Complete Details Click to Enlarge

Small Petal Presser Price: $24.99 The petal presser is actually my small petal puller with the petals inverted. This version of the tool allows you to make a petal shape without having to pull the petal from the glass rod. View Complete Details Click to Enlarge

Ruffler Tool Price: $11.99 This tool allows you to "crimp" your flowers in the middle to give more of a ruffled natural look. Many other uses! View Complete Details Click to Enlarge